Installation Instructions

EN
Saneo B, Saneo C Installing the toilet
15
4.2.2 Wall cutout for the tank flap
The tank flap is used with models Saneo BW and CW Saneo with integrated
water tank.
➤ Use template (1), item 5.3.1 on page 163, for making the cutout for the
tank flap.
You can find the installation description of the tank flap in chapter “Installing
the tank flap” on page 26.
4.3 Setting up the toilet
A
➤ Install the toilet according to the description for the respective model
version.
➤ Set up the toilet so that it is flush to a vertical wall only.
➤ Leave at least 60 mm space to the side walls so that the swivelling of the
upper part of the toilet (with seat) is not restricted.
➤ For installation, use the dimensioned drawings and templates in the
appendix (items 5.2 on page 153, 5.3 on page 162).
When installing the toilet in a wet room, we recommend that you connect the
toilet to the shower tray.
NOTICE!
All components of the system must be installed in frost-free areas.
In freezing temperatures, there is a risk of damage caused by
frost.
5