Product Manual

EN
RUC6408X, RUC8408X Installing the refrigerator
11
•
The refrigerator must be installed in a recess so that it stands secure when the
vehicle is in motion. Note the following dimensions (fig. 3):
Installation with two rear vents
•
The air inlet and outlet vents must not be covered by vehicle parts (such as an
open door or by installing accessories such as bicycle racks) while operating.
•
Install the refrigerator so that it is protected from excessive heat, as this leads to
poor performance and increases the power consumption of the refrigerator.
•
The electrical installation must comply with national and local regulations.
Refrigerator Overall dimension in mm
RUC6408X RUC8408X
Height (A) 1447 1657
Width (B) 550 550
Depth (C)
(excludes control knob 5mm)
677 677
Recess Dimension in mm
RUC6408X RUC8408X
Height (H) 1437 – 1442 1647 –1652
Width (W) 530 – 535 530 – 535
Depth (D) min. 611 min. 611
RUC8408X--IO-AU.book Seite 11 Montag, 13. August 2018 1:33 13