Installation Manual

EN
RUC5208X, RUC6408X, RUC8408X Installing the refrigerator
21
➤ Cut out a section in the roof. Refer to the roof vent instruction manual for the
required dimensions. When doing so, observe the information, see chapter “Pre-
paring the installation” on page 12.
➤ Ensure the installation frame is water resistant (fig. g).
➤ Insert the installation frame and screw it down tightly (fig. h 1). Use all the fixing
holes for this.
➤ Insert the hood and screw it down tightly (fig. h 2).
7.6 Securing the refrigerator
!
I
➤ Push the refrigerator firmly into its final location with the front flange sitting hard
against the recess front.
CAUTION!
Only screw through the bushes built into the refrigerator, otherwise
foamed components, including electrical wiring, can be damaged.
NOTE
Ensure that the screws are tight, even when under increased loads
(while driving).
1.
2.
h
RUC8408X--IO-AU.book Seite 21 Montag, 8. Juli 2019 1:56 13