Operating Guide

EN
RUA6408X, RUA8408X Cleaning and maintenance
37
➤ Loosen the screw on the gas burner cover.
➤ Press the catch below the burner cover inwards, and pull off the burner cover.
➤ Clean the burner pipe of coarse impurities using a suitable cleaning brush with
soft bristles (fig. q).
➤ Blow out the burner pipe with compressed air through the slots in the burner
pipe (fig. r).
➤ Attach the burner cover.
✓ The burner cover is fixed in place when it audibly clicks into place.
➤ Screw the burner cover in place.
➤ Attach the ventilation grille.
r
q
RUA8408X-O-AU.book Seite 37 Montag, 13. August 2018 1:36 13