Installation Manual

EN
RUA5208X, RUA6408X, RUA8408X Scope of delivery
5
A
NOTICE!
• Only hold the refrigerator at the body of the refrigerator during trans-
port. Never hold the refrigerator at the absorber unit, the cooling fins,
the gas pipes, the door or the control panel.
• Make sure that the refrigerator circuit is not damaged during transpor-
tation. The refrigerant in the refrigerator circuit is highly flammable.
In the event of any damage to the refrigerator circuit (smell of ammo-
nia):
– Switch off the refrigerator if applicable.
– Avoid naked flames and sparks.
– Air the room well.
• Do not install the refrigerator near naked flames or other heat sources
(heaters, direct sunlight, gas ovens etc.).
• Danger of overheating!
Always ensure sufficient ventilation so that the heat generated during
operation can dissipate. Make sure that the refrigerator is sufficiently
far away from walls and other objects so that the air can circulate.
• Check that the voltage specification on the type plate is the same as
that of the power supply.
• Do not open the refrigerant circuit under any circumstances.
• Only use the AC connection cable supplied to connect the
refrigerator to the AC mains.
• Only use cables with a suitable size (see chapter “DC power” on
page 28).
• Never pull the plug out of the socket by the connection cable.
• The refrigerator must not be exposed to rain.
3Scope of delivery
Quantity Description
1 Refrigerator
1 Drain hose
1 Bottom trim piece
1 Sealing strip (fitted underneath during installation)
1 Installation and Operating Manual
DometicRUA5208X6408X8408X_INM_4445102444_APAC(en)_xxxx-xx-xx.book Seite 5 Dienstag, 1. Dezember 2020 5:16 17