Installation Manual

EN
RUA5208X, RUA6408X, RUA8408X Installing the refrigerator
15
– Push the bottom trim piece with the four plugs (fig. a 1) into the holes on the
front frame of the refrigerator.
– Snap the three catches (fig. a 2) into the holes under the bottom frame of
the refrigerator.
6.3 Making air inlet and outlet vents
I
➤ Make a cut out in the wall to fit the LS300 for the upper and lower vent system,
see chapter “Preparing the installation” on page 6.
➤ If the lower ventilation grille cannot be installed with the lowest opening of the
grill flush with the floor of the refrigerator, make a gas escape hole in the floor
(fig. b, page 15) so that all unburnt gas will escape.
NOTE
At high ambient temperatures, the refrigerator can only provide its
maximum cooling capacity if the optimum ventilation has been
provided.
a
1
2
≥ 40 mm
b
DometicRUA5208X6408X8408X_INM_4445102444_APAC(en)_xxxx-xx-xx.book Seite 15 Dienstag, 1. Dezember 2020 5:16 17