Installation Guide

EN
Safety instructions RUA6408X, RUA8408X
4
2 Safety instructions
The manufacturer accepts no liability for damage in the following cases:
•
Faulty assembly or connection
•
Damage to the product resulting from mechanical influences and excess voltage
•
Alterations to the product without express permission from the manufacturer
•
Use for purposes other than those described in the operating manual
!
WARNING!
•
Never open the absorber unit. It is under high pressure and can cause
injury if it is opened.
•
Ensure clean and residue-free handling if silicone sealant or similar is
used. There is a risk of fire if silicone filaments come into contact with
hot parts or naked flames.
•
Do not operate the refrigerator if it is visibly damaged.
•
If the AC power cable for this refrigerator is damaged, it must be
replaced by the manufacturer, customer service or a similarly qualified
person in order to prevent safety hazards.
•
Never use a naked flame to check the refrigerator for leaks.
•
This refrigerator may only be repaired by qualified personnel. Inade-
quate repairs may cause serious hazards.
•
Only use universal LPG gas.
•
Only operate the refrigerator at the pressure shown on the type
plate. Only use pressure controllers with a fixed setting which comply
with national regulations.
•
Dismantle all refrigerator doors for the disposal of the old refrigerator
and leave the shelves in the refrigerator to prevent accidental enclo-
sure and suffocation.
!
CAUTION!
•
Danger of crushing! Do not put your fingers into the hinge.
•
Before starting the device, ensure that the power supply line and the
plug are dry.
A
NOTICE!
•
Only hold the refrigerator at the body of the refrigerator during trans-
port. Never hold the refrigerator at the absorber unit, the cooling fins,
the gas pipes, the door or the control panel.
RUA8408X-I-AU.book Seite 4 Donnerstag, 12. April 2018 12:16 12