Installation Guide

EN
RUA6408X, RUA8408X Installing the refrigerator
15
6.4 Installing the drain water hose
➤ To avoid damage on the drain water hose, position the hole for the drain water
hose in a way, that the hose does not touch the boiler casing.
➤ Drill a hole through the floor at the rear of the refrigerator.
➤ Install the drain water hose through the drilled hole. Ensure, that the drain water
hose is long enough in order to drain the water outside of the vehicle.
➤ Ensure that the drain water hose is not kinked.
➤ Seal the area around the drain water hose.
6.5 Installing the ventilation grille
No. in
fig. 0
Description
1Slider
2 Ventilation grille
3 Installation frame
3
2
1
0
RUA8408X-I-AU.book Seite 15 Donnerstag, 12. April 2018 12:16 12