Product Manual

EN
Troubleshooting RMDX21, RMDX25
36
In automatic mode:
The refrigerator is
being operated with
gas although it is
connected to the
AC mains.
The mains voltage is too
low.
The refrigerator changes to
AC power supply automati-
cally as soon as the mains
voltage is sufficient again.
The refrigerator does
not cool sufficiently.
The ventilation around the
cooling unit is not suffi-
cient.
Check that the ventilation grille
is not obstructed.
The evaporator is iced up. Check whether the refrigerator
door is properly closed. Defrost
the refrigerator.
The temperature is set too
high.
Set a lower temperature.
The ambient temperature
is too high.
Remove the ventilation grille
for a while so that warm air can
escape quicker.
Too m uc h f oo d a t
once was placed in the
refrigerator.
Remove an item.
Too m u ch w a rm food a t
once was placed in the
refrigerator.
Remove the warm food and
leave it to cool down before
putting it in again.
The refrigerator has not
been operating for very
long.
Check the temperature again
after four or five hours.
Problem Possible cause Suggested remedy