Product Manual

EN
RMDX21, RMDX25 Using the refrigerator
31
7.13 Replacing the door panel
A
Removing the door panel from framed door model
Proceed as follows (fig. b, page 7):
➤ Remove the door trim carefully. It is only clipped in and held in place by
small hooks.
➤ Pull the old panel away from the door trim still installed.
➤ Push the old panel upwards as far as the stop.
➤ Pull the old panel out of the door.
Installing the new door panel and trim on framed door model
Proceed as follows (fig. c, page 8):
➤ Push the new panel upwards in the door as far as the stop.
➤ Push the new panel downwards into the door.
➤ Pull the new panel into the door trim still installed.
➤ insert the door trim again.
✓ The door trim is secure once it clicks into place.
Removing the door panel from frameless door model
Proceed as follows (fig. d, page 9):
➤ Push the old panel upwards as far as the stop.
➤ Pull the old panel out of the door.
NOTICE! Beware of damage
The door panel must not be replaced when the refrigerator is
upright.