Product Manual

EN
Using the refrigerator RMDX21, RMDX25
30
7.12 Operation at high ambient temperatures
At high outside temperatures in combination with high levels of humidity,
condensation may form on the freezer compartment frame. The freezer
compartment is fitted with a frame heater (12 Vg/3.5 W). Switch the frame
heater on to prevent condensation from forming on the frame of the freezer
compartment.
The frame heater is switched on continuously in the following operating
modes (no display):
 AC operation
 Automatic operation (RMDX25 only)
A
Proceed as follows to switch on the frame heater:
➤ Press the button to set the frame heater as follows:
–Press the button once for a 2-hour setting; the temperature display
shows one bar.
–Press the button a second time for a 5-hour setting; the temperature
display shows two bars.
–Press the button a third time for continuous operation; the temperature
display shows three bars.
–Press the button a fourth time to switch it off; the temperature display
goes off.
NOTICE!
Do not switch the frame heater to permanent operation when the
refrigerator is being operated with gas. This could discharge the
on-board battery.