Product Manual

EN
Using the refrigerator RMDX21, RMDX25
28
7.8 Switching off the refrigerator
Proceed as follows:
➤ Press and hold the button for three seconds.
✓ The display goes out and the refrigerator is switched off completely.
I
➤ Shut off the gas supply in the vehicle and the valve to the gas cylinder.
7.9 Positioning the shelves
!
Removing the shelf (fig. 0, page 6)
➤ For fixed shelves only: Undo the locking pins with a screwdriver.
➤ Press the two locks under the shelf inwards to release the shelf.
➤ Pull out the shelf.
➤ For fixed shelves only: Replace the locking pins again.
Inserting the shelf (fig. a, page 6)
➤ For fixed shelves only: Undo the locking pins with a screwdriver.
➤ Insert the shelf into the required position.
➤ Press the locks under the shelf outwards to secure the shelf.
➤ For fixed shelves only: Replace the locking pins again.
NOTE
If you do not use the refrigerator for a prolonged period of time:
 Unlock the locking mechanism of the door lock by pressing it
inwards and sliding it forwards (fig. 9, page 6). When the
door is then closed, there is a wide gap. This prevents mould
from forming.
WARNING! Children beware!
Two shelves are fixed in place to prevent children from climbing
inside the refrigerator.
 Only remove the shelves for cleaning purposes.
 Replace it in the same position afterwards and lock it into
place.