Manual

EN
PSB150 Intended use
7
4 Intended use
The portable solar blanket is a mobile power supply with a solar charge controller for
charging a 12 Vg battery.
5 Technical description
The portable solar blanket consists of lightweight solar cells with anti-reflective,
scratch-resistant ETFE coating. The solar charge controller stored in a bag of the blan-
ket can be used to charge a 12 Vg battery.
The solar charge controller ensures that the power supplied by the solar blanket is at
the right voltage to charge a home or auxiliary battery. The solar charge controller is
an intelligent 5 stage PWM solar controller.
Solar charge controller
The solar charge controller has the following functions:
•
PWM controlled
•
Five stage charging (Soft, Bulk, Absorption, Equalization, Float)
•
Battery types selectable: LiFePO4, LTO, GEL, AGM, WET or CALCIUM
•
LCD display dynamically displaying operating data and working condition
Additional protective functions of the solar charge controller:
•
Incorrect polarity protections for battery
•
Over voltage protection for battery
•
Over heating protection for battery
•
Battery over-discharge protection
•
Under charge protection for battery
•
Over charge protection for battery
•
Short circuit protection
•
Prevents discharge at night under low light or no light condition
Battery temperature sensor
The battery temperature sensor allows the solar charge controller to continuously
adjust charge voltage based on measured battery temperature. Temperature com-
pensation of charge voltage assures that the battery receives the proper charge volt-
age as battery temperature changes during normal operation.
PSB150W-IO-AUS.book Seite 7 Donnerstag, 2. August 2018 9:15 09