Manual

EN
General safety instructions PSB150
4
A
NOTICE!
•
Check the manufacturer‘s data for your battery and ensure that the
maximum voltage of the solar charge controller does not exceed the
manufacturer‘s recommended charging voltage.
•
Do not use the device to charge non-rechargeable batteries.
•
Be sure to connect the battery before exposing the solar blanket to the
sun.
•
Store the device in a dry and cool place.
2.2 Safety when installing the device
!
WARNING!
•
The electrical installation may only be connected by qualified person-
nel and only in accordance with the national regulations. Incorrect
connection may cause severe hazards.
•
Take the precautions necessary to ensure that children cannot inter-
fere with operation. Dangerous situations may occur which cannot be
recognised by children.
A
NOTICE!
•
Do not expose the device to a heat source (open fire, heating etc.).
Avoid additional heating of the device in this way.
Electrical cables
!
CAUTION!
•
Lay the cables so that they cannot be tripped over or damaged.
A
NOTICE!
•
If cables have to be fed through metal walls or other walls with sharp
edges, use ducts or bushings to prevent damage.
•
Do not lay cables which are loose or bent next to electrically
conductive material (metal).
•
Do not pull on the cables.
•
Do not lay AC cables and DC cables in the same duct.
•
Fasten the cables securely.
PSB150W-IO-AUS.book Seite 4 Donnerstag, 2. August 2018 9:15 09