Manual

EN
PSB150 Using the solar blanket
11
6.2 Connecting the solar blanket
A
Connecting diagram
NOTICE!
•
Always observe the following connection sequence.
Overvoltage can damage the electronics of the device.
– Connecting the solar blanket: First, connect the Alligator
clips to the battery, then connect the Anderson connections to
the solar blanket.
– Disconnecting the solar blanket: Disconnect the Anderson
connections from the solar blanket first, finally disconnect the
Alligator clips from the battery.
•
Ensure that the battery clamps do not get in contact with each other.
•
Only use the cable with Anderson plug and alligator clips supplied.
•
Make sure that the polarity is correct.
•
Make sure that the connection is tight and secure.
No. in fig. 6 Description
1 Solar controller
212Vg battery
3 Solar blanket
gr grey
bk black
Solar Battery
Temp.
Sensor
1
2
3
bk
15 A
15 A
gr
gr
6
PSB150W-IO-AUS.book Seite 11 Donnerstag, 2. August 2018 9:15 09