Instruction Manual

EN
PI8022, PI8023 Cleaning the device
17
7.2 Switching off the device
➤ Switch off the device as shown (fig. a).
7.3 Replacing the gas cylinder
!
➤ Switch the device off by turning the knob to the zero setting.
➤ Close the valve on the gas cylinder.
➤ Replace the gas cylinder according to the instructions from the gas fitting
manufacturer.
8Cleaning the device
!
A
WARNING! Beware of injury!
Only replace the gas cylinder when there is good ventilation.
Make sure that there is no source of ignition nearby.
Only change the gas cylinder when the device is not in use and the gas
supply to the device is switched off.
CAUTION! Hot surface!
The surface may still be hot. Keep children away.
Let the device cool down to ambient temperature before you touch it
with bare hands.
NOTICE!
Do not use any sharp or hard objects for cleaning since they may
damage the device.
Only use standard commercial cleaning agents.
Do not use a steam cleaner to clean the device.
2.
3.
1.
a
DometicPI8002-PI8022-PI8023_IOM_4445103105_APAC(en)_xxxx-xx-xx.book Seite 17 Mittwoch, 20. Januar 2021 10:10 22