Instruction Manual
Table Of Contents
EN
Installing the device PI8022, PI8023
12
➤ Affix the device to the worktop using the screws (fig. 6).
6.3 Connecting the device to the gas supply
!
You must use a rigid gas line for the connection.
Observe the following instructions for the connection:
• Observe the national requirements.
• Use only rigid metal pipe ∅8x1mm.
• Fasten the gas line to the side or rear wall of the surrounding furniture parts so that
no loads are placed on the actuators.
• The entire gas line must be free of stress.
WARNING! Beware of injury!
Only use propane or butane gas cylinders with a certified pressure
reduction valve and suitable head. Compare the pressure information
on the type plate with the pressure information on the propane or
butane gas cylinder.
A
B
h
h
4x
4x
PI8022
PI8023
h= t21 mm
d25 mm
h= t16 mm
d21 mm
6
DometicPI8002-PI8022-PI8023_IOM_4445103105_APAC(en)_xxxx-xx-xx.book Seite 12 Mittwoch, 20. Januar 2021 10:10 22