User Manual

EN
Maintaining and cleaning PBC110
14
➤ Check electrolyte levels if required by your battery type.
➤ If necessary, remove the vent caps and add distilled water so the levels are half-
way between the upper and lower fill lines.
Battery in the vehicle
➤ Switch OFF and remove the AC power socket from the outlet.
➤ First remove the clip from the vehicle chassis.
➤ Then remove the clip from the battery.
➤ Check electrolyte levels if possible.
➤ If necessary, remove the vent caps and add distilled water so the levels are half-
way between the upper and lower fill lines.
8 Maintaining and cleaning
A
NOTICE!
Do not use any sharp or hard objects for cleaning since they may damage
the device.
➤ Disconnect the device from mains power.
➤ Disconnect the device from the battery.
➤ Occasionally clean the device with a damp cloth.
➤ Regularly clean the vents.
➤ Regularly check the connection cables.
!
WARNING!
• The device may not be used if the device itself or the connection cable
are visibly damaged.
• If the supply cord is damaged, it must be replaced by the manufac-
turer, its service agent or similarly qualified persons in order to avoid a
hazard.
• This device may only be repaired by qualified personnel. Inadequate
repairs may cause serious hazards.