User Manual

EN
PBC110 Charging
13
Battery outside the vehicle
➤ Connect the red clip of the battery charger to the positive battery terminal (+).
➤ Connect the black clip of the battery charger to the negative battery terminal (-).
Battery in the vehicle
➤ Determine if the vehicle is positively or negatively earthed.
If negatively earthed (most common):
➤ First connect the red clip of the battery charger to the positive battery
terminal (+).
➤ Then connect the black clip of the battery charger to the vehicle’s chassis and
away from the fuel line.
If positively earthed:
➤ First connect the black clip of the battery charger to the negative battery
terminal (-).
➤ Then connect the red clip of the battery charger to the vehicle’s chassis and far
away from the fuel line.
7.3 Connect the battery charger to mains power
➤ Connect the battery charger to AC mains powered socket.
➤ The battery charger will automatically start when AC power is connected and
switched on.
➤ Check the settings of the device (battery type and charge rate). If necessary,
adjust them.
A
NOTICE!
If the Fault Indicator LED illuminates red, please check your connections as
it’s likely that the positive and negative leads are reversed.
7.4 Disconnect the battery charger
Battery outside the vehicle
➤ Switch OFF and remove the AC power socket from the outlet.
➤ First remove the black clip.
➤ Then remove the red clip.