Product Manual

PJS118 Using the appliance
EN
15
6.7 Starting Vehicles
The jump starter can be used to start vehicles with 12V batteries with up to 6L petrol or 4L diesel
engines.
7
No. in
fig. 7
Description
1 Socket for intelligent battery clamp
2 Intelligent battery clamp
3 Plug for intelligent battery clamp
4 Battery clamps (red/black)
I
➤ Open the socket (fig. 7 1).
➤ Co
nnect the plug (fig. 7 3) of the intelligent battery clamp to the socket (fig. 7 1).
➤ S
witch On the device, following the instructions given in chapter “Starting and switching
on/off” on page 10.
A
NOTE
Ensure that the jump starter is no less than 50% charged.
If it is below 50%, it may not be able to jump start a vehicle.
NOTICE! MATERIAL DAMAGE.
• Once the vehicle is started, disconnect the clamps (fig. 7 4) from the vehicle‘s bat-
tery within 30 seconds (negative terminal on the vehicle‘s battery first).
• Do not connect the red and black clams together.