Product Manual

EN
PGE121 Transport and storage
45
Drain the fuel from the carburetor again
➤ Turn the fuel cap vent lever to “ON” position, see chapter “Before each use” on
page 15.
➤ Turn the fuel tap (fig. B 1) to the “ON” position.
➤ Put the drain hose (fig. B 6) into a suitable container.
➤ Loosen the drain screw (fig. B 4) counterclockwise.
➤ Drain the fuel from the carburetor (fig. B 5) into the container through the drain
hose (fig. B 6).
➤ Tighten the drain screw (fig. B 4) clockwise securely.
➤ Reinstall the drain hose (fig. B 6) into the hole at the bottom casing.
➤ Reinstall the maintenance cover (fig. B 3).
B