Product Manual

EN
Operating the generator PGE121
22
6.3 AC operation
Follow these steps before you start operation:
➤ Start the engine, see chapter “Start the Generator” on page 19.
➤ Let the engine run for 2 or 3 minutes to warm up.
➤ Connect the electrical devices.
Use the ECO mode
This system controls the engine speed according to the connected load. This results
in a better fuel consumption and less noise.
!
WARNING! ELECTRICAL SHOCK
AC sockets are always live when the generator is on.
• Do not operate with wet hands.
No. in
fig. e
Description
1 ECO switch
2 Reset button
3 AC power sockets
4 Start button
5 Ready LED (green)
6 Overload LED (red)
1800
RUNNING VA
2100
MAXIMUM VA
RESET
ECO
ENGINE
5V
2A 1A
5V
AC
PARALLEL
USB
DC 12V / 8A
On
On
On
ON
Off
Off
Off
START
GROUND
OFF
AC 240V / 50Hz
AC 240V / 50Hz
DC Breaker
1
5
6
4
3
2
e