Product Manual

EN
Origo Intended use
9
5 Intended use
The Origo heater 5100 is a non-pressurized alcohol heater designed for use in vehi-
cles or boats. It can be used as heater or as cooking device.
6 Technical description
The heater is made of aluminium and stainless steel and uses the absorption princi-
ple. The canister has a capacity of 1.2 l. Denatured or soot free alcohol is used as fuel.
Alcohol is absorbed into a non-flammable material in the canister.
7 Using the heater
!
7.1 Filling-in denatured alcohol (fig. 1, page 3)
!
➤ Ensure the heater is cooled down to room temperature.
➤ Take off the top cover (1).
➤ Release the burner (4) from outer container (9) by pressing lock spring (10).
➤ Lift the grid (3).
✓ Canister (8), burner (4) and grid (3) are lifted as one unit from the outer
container (9).
➤ Release the canister (8) from the burner (4) by pressing the spring (6).
➤ Check canister opening ensuring there’s neither fire nor glow.
➤ Hold the canister (8) tilted down (fig. 2, page 3).
WARNING!
The top cover (fig. 1 1, page 3) and the outer container (fig. 1 9,
page 3) heat up when in use. Touching them can cause severe burns.
WARNING!
Never pour fuel through the burner openings.
Do not fill near an open fire or glow.
Overfilling, spilt alcohol and hot objects can cause severe burns.
_Origo_5100.book Seite 9 Donnerstag, 5. Januar 2017 11:25 11