Product Manual

EN
Mounting the stove Origo
12
7.2 Installing the stove
A
➤ Cut a rectangular hole into the countertop (dimensions see following table):
➤ Open the top and remove the canisters.
➤ Place the stove in the middle of the cutout.
➤ Mark the drill holes.
Use the drill holes at the rim of the stove as template.
➤ Pre-drill the holes into the countertop where marked.
➤ Fasten the stove by screwing flat head screws through each drill hole at the rim.
➤ Place a class B-1 fire extinguisher in reaching distance.
NOTICE! Danger of damaging the device!
Before drilling any holes, make sure that no electrical cables or other
parts of the vehicle can be damaged by drilling, sawing and filing.
Model Dimensions in mm
2000 345 x 320
4100 575 x 320
Origo_2000_4100.book Seite 12 Freitag, 6. Januar 2017 11:40 11