Operating instructions

EN
Scope of delivery SinePower
24
3 Scope of delivery
z Sine wave inverter
z 4 holders
z Instruction Manual
4 Intended use
a
Caution
This device is exclusively intended for vehicle use.
The SinePower inverters are used to convert a direct current of 12 V or 24 V
into a 230 V AC supply of 50 Hz.
z 12 V:
SinePower MSP 162, item no. MSP160-012, or
SinePower MSP 352, item no. MSP350-012
z 24 V:
SinePower MSP 164, item no. MSP160-024, or
SinePower MSP 354, item no. MSP350-024
5 Technical description
The inverter can be operated wherever there is a 12 V DC vehicle socket
(MSP 162 or MSP 352) and a 24 V DC vehicle socket (MSP 164 or
MSP 354).
The devices are additionally cooled with a load and temperature-dependent
fan (fig. 2 5, page 4).
The maximum constant output for the devices is as follows:
z For inverters MSP 162 and MSP 164 150 W
z For inverters MSP 352 and MSP 354 350 W
Never connect devices that have a higher power requirement.
The inverter can be switched on and off using the switch directly on the de-
vice or using an external switch.
_MSP160_MSP350.book Seite 24 Freitag, 9. September 2011 4:44 16