Operation Manual

Operation W30 DC/AC
8
5.1 Energy saving tips
z Choose a well ventilated installation location which is protected against di-
rect sunlight.
z Allow food to cool down first before placing it in the device.
z Do not open the cooling device more often than necessary.
z Do not leave the lid or door open for longer than necessary.
5.2 Using the cooler
I
Note
Like every cooling device, your cooler must be properly ventilated
so that any heat created can dissipate. Otherwise proper function-
ing cannot be ensured.
➤ Place the cooler on a firm base.
➤ Connect the 12 V connection cable (fig. 2 1, page 3) to the cigarette
lighter or a 12 V socket in your vehicle or …
➤ Connect the 230 V connection cable (fig. 2 2, page 3) to the 220-240 V
AC mains supply.
I
Note
Close the cooler by pushing down the lid and turning the handle for-
ward.
✓ After a certain period of time, the temperature inside the container will
cool down by up to max. approx. 20 °C.
a
Caution!
Ensure that the objects placed in the cooler are suitable for cooling/
warming to the selected temperature.
➤ If you wish to switch off the device, pull out the connecting cable.
5.3 Removing the trolley
You can remove the trolley as follows and use the device as a separate
cooler:
➤ Remove the lid.
Position the lid at an angle of approx. 30° and then pull it out of the fas-
tening groove.
_W30.book Seite 8 Dienstag, 25. März 2008 2:27 14