Operation Manual

S15 DC, S15 DC/AC, U15 DC Operation
9
5 Operation
I
Note
Before starting your new cooling device for the first time, you
should clean it inside and outside with a damp cloth for hygienic
reasons (please also refer to the “Cleaning and maintenance”
chapter on page 10).
5.1 Energy saving tips
z Choose a well ventilated installation location which is protected against di-
rect sunlight.
z Allow warm food to cool down first before placing it in the device to keep
cool.
z Do not open the cooling device more often than necessary.
z Do not leave the lid or door open for longer than necessary.
5.2 Using the cooler
a
Caution!
The lid of the cool box must always be secured with the lock when
loading and unloading (fig. 2, page 3). If the lid is fully open with-
out being secured, the box could tip over.
I
Note
Like every cooling device, your cooler must be properly ventilated
so that any heat created can dissipate. Otherwise proper function-
ing cannot be ensured.
➤ Place the cooler on a firm base.
➤ Connect the 12 V connection cable to the cigarette lighter or a 12 V plug
socket in the vehicle.
or …
➤ S15 DC/AC only: connect the 12 V connection cable to the rectifier
(fig. 3, page 3) and plug rectifier into a 100 – 240 V AC socket.
I
Note
Close the box tightly by pushing down the lid.
_S15_U15.book Seite 9 Freitag, 20. Februar 2009 5:13 17