Operation Manual

EN
MCA1215 – MCA2440 Connecting the device
51
Charging using the remote control MCA-RC1 (accessory)
I
NOTE
The length of the RJ-11 cable may not exceed 7 m.
➤ Insert one end of the RJ-11 cable into the socket (fig. 0 3, page 7) of the
MCA-RC1.
➤ Insert the other end of the RJ-11 cable into the TEMP/LIN1 socket on the
MCA battery charger.
➤ Fit a suitable fuse to the control cable (12 V/0.5 A).
➤ Set the DIP switches 1 to 3 on the MCA battery charger to “ON” (“Setting
the DIP switches” on page 54).
8.3 Wiring diagrams
Example of a wiring diagram, 12 V: see fig. 5, page 6.
No. in
fig. 5, page 6
Explanation/function
1 MCA charger
2 Consumer
3 Perfect Control display MPC01
4 12 V battery sensor IBS
5 12 V battery
6Fuse
7 Starter battery