Operation Manual

Using the device MCA1215 – MCA2440

9 Using the device

➤ Set the On/off switch to “On”.

To switch off the device set the On/off switch to “On”.

✓Depending on the charging condition of the battery, the battery charger

starts charging or supplies a retention voltage.

✓The “Status” LED (fig. 1 5, page 3) displays the operating status (see

following table and “Battery charging function” on page 46).

NOTE

In the event of a fault (the Status LED is red), refer to “Trouble-

shooting” on page 58).

Display Meaning

Orange, quickly flashing Phase 1

Orange, slowly flashing Phase 2

Orange, constantly lit Phase 3

Green, constantly lit Phase 4

Green, slowly flashing Phase 5

Red, constantly lit Short circuit or defective fuse

Red, quickly flashing Battery or battery charger is overheat-

ing

Red, slowly flashing Battery undervoltage or overload

Red, double flash Fan fault

Red, slow double flash Fault at the starter battery connection