Installation Guide

15
EN
Harrier series Installation
See fig. a
➤ Make an opening on one side in order to feed through the electrical power
supply cable.
➤ Feed the 240 Vw cable through the opening into the vehicle interior.
8.5 Installing the roof air conditioner ADB
A
See fig. b
➤ Orientate roof frame based on opening size.
➤ Fit the roof frame into the roof opening
➤ Seal around the roof frame with flexible non-hardening butyl sealing com-
pound (e.g. SikaLastomer-710, Selleys Butyl Mastic, Bostik ezycaulk butyl
sealant, or similar products).
NOTICE! Risk of damage
Observe the structural strength of the roof of the vehicle. The roof of the vehicle
must be able to bear the weight of the roof air conditioner. The roof must not
be indented or deformed by the weight of the unit, even over a longer period
of time.
a
b
Harrier-Lite_INM.book Seite 15 Donnerstag, 30. April 2020 3:45 15