Installation Guide

13
EN
Harrier series Installation
8.3 Installing in an existing opening
I
See fig. 8
➤ Remove all screws and fixtures of the existing roof hatch or air conditioner.
➤ Take out the roof hatch or air conditioner.
See fig. 9
➤ Remove the sealant around the opening using a scraper or similar tool.
NOTE
• Existing roof hatch openings in accordance with fig. 8 are suitable for
installing the roof air conditioner.
• Dispose of all waste material, glue, silicone and seals separately. Observe
the disposal guidelines.
• The manufacturer only assumes liability for parts included in the scope of
delivery. The validity of the warranty expires if the device is installed
together with third-party parts.
8
9
Harrier-Lite_INM.book Seite 13 Donnerstag, 30. April 2020 3:45 15