Installation Guide

EN
Dometic Harrier Inverter Disposal
17
10 Disposal
Regulations for environmental safety and correct disposal
All organisations must apply a set of procedures to identify, evaluate and
control the influence that their activities (manufacturing, products, services,
etc.) have on the environment.
The procedures to be followed to identify significant environmental impact
must take the following factors into account:
 use of raw materials and natural resources
 atmospheric emissions
 discharge of liquids
 waste management and recycling
 contamination of the soil
In order to minimise environmental impact, the manufacturer provides a
series of indications here below that should be taken into account by all those
who, for whatever reason, interact with the appliance during its working life.
 All packing components must be disposed of (preferably recycled) in com-
pliance with statutory legislation in the country in which disposal takes
place.
 All product components must be disposed of (preferably recycled) in com-
pliance with statutory legislation in the country in which disposal takes
place.
 For correct disposal, the appliance must be consigned to an authorised
waste disposal company to ensure that all recyclable components are
reused and the remaining materials are processed properly.
 During installation ensure the room has adequate ventilation to prevent
the build-up of stale air that might be harmful to the health of the opera-
tors.
Remote control
does not register
The remote control is not pointing
towards the ADB display.
➤ Point the remote control to-
wards the ADB display.
The batteries in the remote control
are low.
Note: The display of the remote con-
trol will still be bright even if the bat-
teries are low.
➤ Replace the batteries in the re-
mote control.
Problem Cause Remedy