Technical data

INSTRUCTION
Retrofit Electrical Automatic Door Control
RH 330, RH340, RH 341, RH 360, RH 361
In order to retrofit the electrical automatic door control, the following service-kit with spare
part number 210 6821-20 will be required.
You can order the service-kit at:
Dometic GmbH
Export Department
In der Steinwiese 16
D-57074 Siegen
Tel.: [phone]
Fax.: [phone]
Mounting the Electrical Automatic Door Control
14
Service-kit
Spare part number: 210 6821-20
B
C
D
E
F
A
three pieces
1. Pull out the mains
plug.
2. Unscrew the door
hinge.
3. Remove the door. 4. Unscrew the middle screw
from the lower doorstrip.
5. Mount the magnet
(B) at the lower door-
strip.The magnet
should be directed
towards the inside of
the miniBar.
6. Unscrew the two
lower hinges.
7. Take the distance-
plates (A) and put
the plates under the
hinges .
8. Mount the hinges
with the distance-
plates back on place.
A
A
599 4722-38/6 RS 04.03.1999