Specifications
64 65
www.airconservice.eu
Contents, specifications and availability are subject to change due to the technical improvement.
We are not liable for errors and printing mistakes.
Brochure
TIPP
Tools Tools
8885300092
8885300037 8885300035
8885300095
8885300045
8885300002
Octagon sockets for fitting service valves / O-ring pick tool
Valve fitting tools
Fitting tool for Schrader valves used in R 134a A/C systems,
e.g. on Ford or Japanese vehicles
Ŷ For high- and low-pressure side; connection diameters: 6.3 and 4.5 mm
Torque wrench
Ŷ For high- and low-pressure side; connection diameter 4.5 mm
Slide hammer puller for dryer cores
For removal of plugs on dryer cores
Ŷ High quality special tool for easy removal of plugs on dryer cores
Ŷ Required for new condenser designs where the dryer is located inside
the unit, e.g. on Audi, Seat, Skoda, Opel and Ford cars
Ŷ Universal tool for plugs with 5 mm inside thread
Crimping tool for refrigerant fittings
Extremely sturdy, heavy-duty tool kit for fast and reliable
connection of hoses and fittings
Ŷ Operated by integrated hydraulic hand pump
Ŷ Equally suitable for use with aluminium and thin-walled steel fittings
Ŷ Socket sets for four hose sizes (6 – 8 – 10 – 12) included in the kit
Scope of delivery
Crimping tool and 7 socket sets
Ref. No.
8885300091 (slide hammer puller)
Thin-walled sockets for exchanging 8-sided service ports
(R 134a)
Special tool for picking O-lock gaskets on refrigerated
vehicles or standard O-rings
Ref. No.
8885300045 (supplied in sturdy service case)
8885300002 (hose cutter)
Ref. No.
8885300032 (for low-pressure side)
8885300033 for high-pressure side)
8885300092 (for removal of expansion valves on VW and Audi cars)
8885300094 (O-ring pick tool)
Ref. No.
8885300037 (for Ford or Japanese vehicles)
8885300035 (for Ford, French or Japanese vehicles)
8885300095 (torque wrench)
O-ring pick tool
Skoda
,
Opel
and
Ford
cars
5
mm inside thread
ller
)
Manuli case set
Set of special ring spanners
Set of ring spanners for the opening/closing of air conditioner
pipes and threaded connections
Ŷ Universal set of ring spanners, sizes:
10 mm / 11 mm / 13 mm /
17 mm / 19 mm / 22 mm
Ŷ Supplied in high quality tool bag
Ref. No.
8885300093 (set of ring spanners)
Manuli case set
Ŷ Tool set for working with Manuli fittings
Ŷ The hose cutter is necessary in order not to damage the inner plastic core during
cutting
Ŷ Using the special fitting tool, fittings can be sealed quickly and reliably –
and released, if required
Scope of delivery Fitting tool, hose cutter, mandrel
Ref. No.
8885300060 (case set)
8885300066 (spare blade
Easy repair set for aluminium refrigerant pipes
For easy repair of damaged pipes
Ŷ Low-cost alternative to fitting a new refrigerant pipe
Ŷ No special tools required
Ref. No.
8885400119 (repair kit for 1/2" pipes)
8885400120 (repair kit for 3/8" pipes)
8885400121 (repair kit for 5/16" pipes)
8885400123 (repair kit for 5/8" pipes)
8885400122 ( set of seals for 1/2", 3/8", 5/16" pipes)
8885400146 (T-piece for 5/16" pipes, low side)
8885400147 (T-piece for 3/8" pipes, low side)
8885400148 (T-piece for 1/2" pipes, low side)
8885400149 (T-piece for 5/8" pipes, low side)
8885400150 (T-piece for 10 mm pipes, low side)
8885400151 (T-piece for 12 mm pipes, low side)
8885400152 (T-piece for 15 mm pipes, low side)
8885400153 (T-piece for 16 mm pipes, low side)
8885400154 (T-piece for 5/16" pipes, high side)
8885400155 (T-piece for 3/8" pipes, high side)
8885400156 (T-piece for 1/2" pipes, high side)
8885400157 (T-piece for 5/8" pipes, high side)
8885400158 (T-piece for 10 mm pipes, high side)
8885400159 (T-piece for 12 mm pipes, high side)
8885400160 (T-piece for 15 mm pipes, high side)
8885400161 (T-piece for 16 mm pipes, high side)
Damaged pipe section is sawn out
Repair: insert the connection sleeve – tighten – done!
Chek out our complete range at
www.airconservice.de/easy-reparatur