Specifications

18 19
www.airconservice.eu
Contents, specifications and availability are subject to change due to the technical improvement.
We are not liable for errors and printing mistakes.
AirCon Service Centre
AirCon Service Centre
TOP-
seller
Op
tional
ASC 2000 – WITH PATENTED FEEDING SYSTEM FOR
FRESH OIL AND UV ADDITIVE
With special
software for A/C
flushing to vehicle
manufacturer’s
specifications
ASC 2000 – FULLY AUTOMATIC A/C SERVICE UNIT
ASC 2000 FEATURES:
Standard on ASC 2000 units:
Patented feeding system for fresh
oil and UV additive
Individual user code:
To prevent unauthorised use of WAECO A/C service units, up to 10 user names can be programmed in combination
with individual PIN codes.
Personalised charging amount database:
ASC-series units give you the option to create a personalised charging amount database for 100 different vehicles.
Built-in data printer:
Measurements can be printed out as often as desired once the service process has been completed. The amount
of recovered refrigerant can be blanked out if required.
A/C service worldwide: the ASC 2000 is also available in a 110 V – 50/60 Hz version.
Ref. No.
9103301815 (See pages 30/31 for specifications)
8889900001 (Instruction package for A/C service units)
8885400035 (Adapter for non-returnable bottles, 1/4" HP)
Safe and secure:
Accessory kit for service on hybrid
vehicles
Swivel and tilt manometer panel:
Easy to read from every angle in the workshop
NEW
Ease of use at its best. Designed for professional A/C
service on trucks and cars, the ASC 2000 minimises
operator effort and throughput time. Prior to system
start the operator can read the oil level from the
display. Afterwards, the following processes
are performed fully automatic:
› Refrigerant recovery and recycling
› Residual pressure measurement
› Used oil drainage
› Evacuation
› Leak check
› Fresh oil and UV additive charging
› Refrigerant charging with charging amount
compensation of the service hoses
Additional ASC 2000 benefits:
› Large charging cylinder storage capacity
(21 kg)
› Dust cover included as standard
› Accurate oil management with 3 separate
micro scales
Ŷ Charging cylinder storage capacity:
21 kg, vacuum pump capacity: 5 cars/h
Ŷ Patented feeding system for fresh oil
and UV additive incl. test bottles
Ŷ
Print-out of important service data,
several print-outs possible
Ŷ Dust cover included
Ŷ Fully automatic refrigerant recycling, oil
and additive management
Ŷ Automatic vacuum check
Ŷ Automatic charging of leak detection
additive
Ŷ Integrated refrigerant charging and
recovery amount management
Ŷ Integrated charging amount database
Ŷ Complies with SAE J 2099 and SAE J 2788
Ŷ Personalised charging amount database
Ŷ
Operator guidance via large display and
manometer
Ŷ NEW: swivel and tilt manometer panel
(patented)
Ŷ
Heated charging cylinder for high-speed
charging, heat-up also possible during the
charging process
Ŷ Special, 8-bearing weighing platform
Ŷ Special air conditioner flush function
Ŷ 500 ml used oil container for longer change
intervals
Ŷ Also suitable for German-make hybrid
vehicles
Ŷ Service on Asian-make hybrid vehicles
is possible if the optional flushing kit for
the ASC’s internal circuit was installed
(see page 54)