Installation Instructions

EN
Installing windows S7P
6
See fig. 5
A
➤ Seal the window frame with a flexible non-hardening sealing compound (e.g.
SikaLastomer-710).
➤ Determine the number of clips by referring to the following table:
See fig. 6
➤ Glue the mounting frame to the vehicle wall, e.g. with double-sided adhesive
tape.
➤ Insert the window from the outside in the centre of the wall section.
➤ Press the window slightly so that the packing compound spreads out.
NOTICE!
Observe the sealant manufacturer's instructions.
Window size
Number of securing clips
per side
Window size
Number of securing clips
per side
W x H Horizontal Vertical W x H Horizontal Vertical
300 x 450 2 3 – 4 900 x 500 6 3
450 x 510 4 3 900 x 600 4
500 x 300 2 1000 x 300 2
500 x 400 3 1000 x 450 3
510 x 510 3 1000 x 510 3
550 x 600 4 1000 x 600 4
600 x 250 2 1100 x 350 2
600 x 510 3 1100 x 600 4
600 x 550 4 1200 x 300 2
650 x 300 2 1200 x 450 8 3
650 x 400 3 1300 x 510 3
700 x 350 6 2 1300 x 600 4
700 x 500 3 1300 x 700 6
800 x 400 3 1400 x 600 4
800 x 510 3 1450 x 550 4
900 x 450 3
S7P-IO-16s.book Seite 6 Donnerstag, 23. Februar 2017 9:13 21