Installation Instructions

EN
S7P Installing windows
5
6.1 Pressing out the hole
See fig. 2
6.2 Preparing the installation
Supplementary to fig. 3
➤ Measure wall thickness W (A)
If the wall thickness is less than 22 mm, then you must add to the wall section
with a suitable mounting frame (B)
➤ Determine the type of clip by referring to the following table:
7 Installing windows
See fig. 4
➤ Check that the window has sufficient space around it (approx.1 to 2.5 mm) in the
wall section.
➤ Clean the wall section externally in the mounting area.
Wall thickness W Clip type Ref. no.
22 – 23 mm M 1139 9104116094
24 – 25 mm M 1110 9104116095
26 – 27 mm M 1134 9104116096
28 – 29 mm M 1135 9104116097
30 – 31 mm M 1136 9104116098
32 – 33 mm M 1137 9104116099
34 – 35 mm M 1142 9104116100
36 – 37 mm M 1143 9104116101
38 – 39 mm M 1144 9104116102
40 – 41 mm M 1145 9104116031
42 – 43 mm M 1146 9104116104
S7P-IO-16s.book Seite 5 Donnerstag, 23. Februar 2017 9:13 21