Installation Instructions

EN
S4 Installing S4
7
Supplementary to fig. 5 B: Wall thicknesses of 27 – 53 mm:
➤ Select the spacer strips (1) by referring to the table below.
I
➤ Ensure the spacer strips (1) have a bevel (2) of 2 mm x 45° or a radius (2)
of 2 mm.
➤ Stick the spacer strips (1) to the outer frame, e.g. using double-sided
sticky tape (3).
See fig. 6
➤ Clean the wall section in the installation area.
Wall thickness Height of the spacer strips
Fastening screws
(Not in scope of delivery)
27 – 28 mm 5 mm 3.9 x 30 mm
29 – 30 mm 7 mm 3.9 x 30 mm
31 – 32 mm 9 mm 3.9 x 30 mm
33 – 34 mm 11 mm 3.9 x 30 mm
35 – 36 mm 13 mm 3.9 x 30 mm
37 – 38 mm 15 mm 3.9 x 40 mm
39 – 40 mm 17 mm 3.9 x 40 mm
41 – 42 mm 19 mm 3.9 x 40 mm
43 – 44 mm 21 mm 3.9 x 40 mm
45 – 46 mm 23 mm 3.9 x 45 mm
47 – 48 mm 25 mm 3.9 x 45 mm
49 – 50 mm 27 mm 3.9 x 45 mm
51 – 52 mm 29 mm 3.9 x 50 mm
53 mm 31 mm 3.9 x 50 mm
NOTE
You can use spacer strips made of wood, plastic or aluminium.
The spacer strips should be 4 mm wide.