Product Manual

EN
Using the Midi Heki Midi Heki roof light
14
Closing the roof light without power (emergency operation)
If the roof light does not close with the rocker switch (for example, if a power failure
occurs), you can close it manually. An emergency crank set is included in the scope
of delivery for this.
➤ Remove the cover caps (fig. c 2) in the ventilation grille using the slotted screw-
driver.
➤ Undo the fastening screws (fig. c 1) using the Phillips screwdriver.
➤ Disconnect the power supply from the vehicle to the roof light.
➤ Disconnect the 12-V power supply line of the vehicle (fig. b 3) from the power
supply line of the roof light (fig. b 4).
➤ Press the motor unlocking (fig. g 1).
➤ Insert the emergency crank (fig. g 2) in the hexagon socket.
➤ Close the roof light by turning the crank anti-clockwise.
➤ Check whether the roof light is locked properly: Try to push up the pane of glass
with your hand (without using force).
➤ Reconnect the connecting cable.
➤ Fit the ventilation grille.
➤ Press the two cover caps (fig. c 2) into the ventilation grille.
Replacing the fuse (fig. b)
You can use the screwdriver from the emergency crank set (in the scope of delivery)
for this.
➤ Remove the cover caps (fig. c 2) in the ventilation grille using the slotted screw-
driver.
➤ Undo the fastening screws (fig. c 1) using the Phillips screwdriver.
➤ Disconnect the power supply from the vehicle to the roof light.
➤ Disconnect the 12-V power supply line of the vehicle (fig. b 3) from the power
supply line of the roof light (fig. b 4).
➤ Replace the fuse (5) (plane fuse 10 A).
➤ Reconnect the connecting cable.
➤ Fit the ventilation grille.
➤ Press the two cover caps (fig. c 2) into the ventilation grille.
Midi-Heki--IO-16s.book Seite 14 Freitag, 10. Februar 2017 5:29 17