Product Manual

EN
Cleaning and maintenance CT4000
22
!
➤ Close the cover (fig. i).
➤ Place the slider back on.
6.4 Cleaning the bayonet fitting and greasing the
bayonet seal
➤ Release the slider from the cassette (chapter “Releasing the slider from the
cassette” on page 20).
➤ Clean the bayonet fitting (fig. j 1) on the slider.
➤ Uniformly grease the bayonet seal (fig. j 2) with silicone grease.
➤ Place the slider back on.
CAUTION! Danger of crushing!
Do not reach into the opening when you close the cover.
i
1
2
j
CT4000-O-AUS.book Seite 22 Dienstag, 6. März 2018 1:41 13