CT4000-O-AUS.book Seite 1 Dienstag, 6.
CT4000-O-AUS.book Seite 2 Dienstag, 6.
CT4000-O-AUS.book Seite 3 Dienstag, 6.
CT4000-O-AUS.book Seite 4 Dienstag, 6. März 2018 1:41 13 CT4000 Please read this instruction manual carefully before first use, and store it in a safe place. If you pass on the product to another person, hand over this instruction manual along with it. Table of contents 4 1 Explanation of symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 2 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 2.
CT4000-O-AUS.book Seite 5 Dienstag, 6. März 2018 1:41 13 CT4000 Explanation of symbols 8 What to do in case of problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 9 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 10 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 11 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CT4000-O-AUS.book Seite 6 Dienstag, 6.
CT4000-O-AUS.book Seite 7 Dienstag, 6. März 2018 1:41 13 CT4000 3 Intended use Intended use The toilet is designed for installation and use in recreational vehicles such as camper vans or motor caravans. 4 Technical description The cassette toilet CTx 4xxx consists of a toilet permanently installed in the vehicle and a removable, mobile cassette as a holding tank. The cassette is externally accessible through a door.
CT4000-O-AUS.book Seite 8 Dienstag, 6. März 2018 1:41 13 Technical description 4.1 CT4000 Description of the components 1 7 6 8 5 4 3 2 9 1 No. in fig.
CT4000-O-AUS.book Seite 9 Dienstag, 6. März 2018 1:41 13 CT4000 Using the toilet 4.2 Control and display elements 2 1 2 5 3 4 No. in fig.
CT4000-O-AUS.book Seite 10 Dienstag, 6. März 2018 1:41 13 Using the toilet 5.1 CT4000 Sanitary accessories Sanitary additives for the holding tank decompose faeces and prevent unpleasant odours. The manufacturer recommends: • Dometic POWER CARE TABS • Dometic GREEN CARE TABS When using sanitary additives, please note the instructions for use on the packaging. I NOTE Conventional toilet paper can clog the toilet. Use a special fast-dissolving toilet paper.
CT4000-O-AUS.book Seite 11 Dienstag, 6. März 2018 1:41 13 CT4000 Using the toilet Adding sanitary additive 4 90 >9 ° 0° ➤ Position the cassette tank upright. ➤ Rotate the drain pipe approx. 90° upward (fig. 4). I 5 NOTE Avoid turning the drain pipe more than 90°, as it otherwise can come off (fig. 4). 1. 2. ➤ Twist off the cap (fig. 5 1). ➤ Add sanitary additive into the cassette tank via the drain pipe (fig. 5 2). Observe the instructions for the sanitary additive.
CT4000-O-AUS.book Seite 12 Dienstag, 6. März 2018 1:41 13 Using the toilet CT4000 Pushing the cassette tank into the cassette housing A NOTICE! Ensure that the cassette tank can be pushed into the cassette housing easily. Make sure that the cassette tank does not bump into other objects or components. ➤ Slide the cassette tank all the way into the cassette housing. ✓ The cassette tank lock locks by itself upon being pushed in. ➤ Check that the cassette tank is securely installed.
CT4000-O-AUS.book Seite 13 Dienstag, 6. März 2018 1:41 13 CT4000 Using the toilet ➤ Before use, press the flush button (fig. 6 2). to allow some water to run into the bowl ➤ Pull the slider (fig. 6 3) forward. Leave the slider open during use. 7 1. 2. ➤ After use, press the flush button again to rinse the bowl (fig. 7 1). ➤ Close the slider (fig. 7 2). The cassette tank has a capacity of 19 l. When the indicator can only be used a few more times.
CT4000-O-AUS.book Seite 14 Dienstag, 6. März 2018 1:41 13 Using the toilet 5.4 CT4000 Draining the cassette tank Empty the cassette tank when the indicator lights up. ➤ Remove the cassette tank (chapter “Removing the cassette tank” on page 10). 8 2. 1. ➤ Press the release button in the middle of the handle and pull the handle out to its end position (fig. 8). A NOTICE! • Do not shake the cassette tank vigorously. • Do not hang the cassette tank on a bicycle or other vehicle for transportation.
CT4000-O-AUS.book Seite 15 Dienstag, 6. März 2018 1:41 13 CT4000 Using the toilet 9 90 ° >9 0° ➤ Set the cassette tank upright and rotate the drain pipe 90° upward (fig. 9). I NOTE Avoid turning the drain pipe more than 90°, as it otherwise can come off. 0 ➤ Twist off the cap (fig. 0).
CT4000-O-AUS.book Seite 16 Dienstag, 6. März 2018 1:41 13 Using the toilet CT4000 a 1 2 3 ➤ Hold the cassette tank by the handle with one hand (fig. a 3) and with the other hand on the slider (fig. a 2), so that you can push the vent button (fig. a 1) while it is draining. ➤ Press the vent button when the drain pipe points downwards. ✓ The tank drains steadily and without splashing. ➤ After draining, rinse out the cassette tank carefully.
CT4000-O-AUS.book Seite 17 Dienstag, 6. März 2018 1:41 13 CT4000 5.5 Using the toilet Positioning the toilet seat b The toilet seat can be swivelled continuously (fig. b). 5.6 Winter operation A NOTICE! Do not use antifreeze. Antifreeze may damage the cassette toilet. You can also use the cassette toilet in the winter, as long as the toilet and cassette tank are in a frost-free area. If this is not the case, empty the freshwater tank, the cassette tank and the water line of the freshwater supply.
CT4000-O-AUS.book Seite 18 Dienstag, 6. März 2018 1:41 13 Cleaning and maintenance 5.7 CT4000 Shutting down Drain the freshwater tank and the water supply system completely if you are going to take the toilet out of service for an extended period of time. ➤ Clean the toilet carefully (chapter “Cleaning and maintenance” on page 18). ➤ Operate the flush button until no more water is in the pipes. ➤ Interrupt the power supply to the toilet. ➤ Then drain the cassette tank and rinse it out carefully.
CT4000-O-AUS.book Seite 19 Dienstag, 6. März 2018 1:41 13 CT4000 Cleaning and maintenance c ! CAUTION! When the slider is closed during cleaning or greasing, there is a risk of crushing body parts (fig. c). The slide moves smoothly when it is regularly lubricated. 6.1 Greasing the slider Greasing the slider rods d ➤ Spray the rods of the slider with silicone spray (fig. d).
CT4000-O-AUS.book Seite 20 Dienstag, 6. März 2018 1:41 13 Cleaning and maintenance CT4000 6.2 Releasing the slider from the cassette ! CAUTION! When the slider is closed during cleaning or greasing, there is a risk of crushing body parts. e ➤ Remove the cassette tank and place it on a firm surface (fig. e). f 2. 1. ➤ Unlatch the slider handle and pull it out. (fig. f).
CT4000-O-AUS.book Seite 21 Dienstag, 6. März 2018 1:41 13 CT4000 Cleaning and maintenance g ➤ Turn the slider anti-clockwise and release it from the cassette (fig. g). In the state upon delivery and after extended use, the bayonet fitting can be loosened only with difficulty. 6.3 Greasing the cassette seal ➤ Release the slider from the cassette (chapter “Releasing the slider from the cassette” on page 20). h 1. 1 ➤ Push back the cover so that the seal is accessible (fig. h).
CT4000-O-AUS.book Seite 22 Dienstag, 6. März 2018 1:41 13 Cleaning and maintenance CT4000 i ! CAUTION! Danger of crushing! Do not reach into the opening when you close the cover. ➤ Close the cover (fig. i). ➤ Place the slider back on. 6.4 Cleaning the bayonet fitting and greasing the bayonet seal ➤ Release the slider from the cassette (chapter “Releasing the slider from the cassette” on page 20). j 1 2 ➤ Clean the bayonet fitting (fig. j 1) on the slider.
CT4000-O-AUS.book Seite 23 Dienstag, 6. März 2018 1:41 13 CT4000 6.5 Maintenance Greasing the O-ring of the cassette vent k 1 2. 1. 2 ➤ Take the adapter (fig. k 1) off the cassette. ➤ Grease only the attached O-ring (fig. k 2) with silicone grease. 7 Maintenance This chapter describes maintenance that may be performed by the user. Have all other maintenance and service work performed by qualified personnel. 7.
CT4000-O-AUS.book Seite 24 Dienstag, 6. März 2018 1:41 13 Maintenance CT4000 7.2 Removing and replacing the lid and seat I NOTE The manufacturer accepts no liability for damage resulting from incorrect or faulty installation. The required tools are included with the manuals. For the exchange of lid and seat, use the Dometic Renew Kit for CT3000/CT4000 (ref. no. 9600000458). l 1 1. 6x 2. ➤ Release the toilet seat (fig. l). m ➤ Remove the toilet seat (fig. m).
CT4000-O-AUS.book Seite 25 Dienstag, 6. März 2018 1:41 13 CT4000 Maintenance n CLICK ➤ Position the new toilet seat and press it down until it latches in place (fig. n). 7.3 Replacing the cassette seal ➤ Release the slider from the cassette (chapter “Releasing the slider from the cassette” on page 20). o 2. 1. 3. ➤ Push back the cover so that the seal is accessible (fig. o). ➤ Remove the support ring and the seal (fig. o).
CT4000-O-AUS.book Seite 26 Dienstag, 6. März 2018 1:41 13 Maintenance CT4000 p ➤ Insert the new seal (fig. p). q A NOTICE! The seal must be positioned uniformly in the opening (fig. q) so that the cassette is sealed and the slider can move easily. r ➤ Insert the support ring (fig. r ).
CT4000-O-AUS.book Seite 27 Dienstag, 6. März 2018 1:41 13 CT4000 Maintenance ➤ Grease all areas. s ! CAUTION! Danger of crushing! Do not reach into the opening when you close the cover. ➤ Close the cover (fig. s). ➤ Place the slider back on. 7.4 Replacing the bayonet seal ➤ Release the slider from the cassette (chapter “Releasing the slider from the cassette” on page 20). t 1 2 ➤ Remove the old seal (fig. t 2). ➤ Clean the bayonet fitting. ➤ Insert the new seal.
CT4000-O-AUS.book Seite 28 Dienstag, 6. März 2018 1:41 13 Maintenance CT4000 7.5 Replacing the fuse in the operating unit ! CAUTION! • Switch off the voltage supply before you start! • Carefully pull the control unit out of the wall opening. There is a risk of injury due to the springs springing back! u 1. 2. 1 X3 X4 X2 X1 7.5 X0 ➤ Lift the control unit with a suitable tool and then pull it out of the bracket or wall (fig. u). ➤ Replace the fuse (automotive fuse: 7.
CT4000-O-AUS.book Seite 29 Dienstag, 6. März 2018 1:41 13 CT4000 7.6 Maintenance Replacing the wheels on the cassette tank The wheels on the cassette tank can be replaced individually if required: v A B 2. 1. C 1. D CLICK 2. ➤ Remove the old wheel as shown (fig. v A B). ➤ Mount the new wheel as shown (fig. v C D). ➤ Ensure that the wheel moves freely.
CT4000-O-AUS.book Seite 30 Dienstag, 6. März 2018 1:41 13 What to do in case of problems 8 CT4000 What to do in case of problems Dometic offers a Europe-wide service network. Authorized customer service centres are available on the Internet on the website dometic.com. When contacting customer service, please make a note of the following information on the type plate: • • • • Model Designation Product Number Serial No.
CT4000-O-AUS.book Seite 31 Dienstag, 6. März 2018 1:41 13 CT4000 Disposal For repair and guarantee processing, please include the following documents when you send in the device: • A copy of the receipt with purchasing date • A reason for the claim or description of the fault 10 Disposal ➤ Place the packaging material in the appropriate recycling waste bins wherever possible.
YOUR LOCAL SUPPORT YOUR LOCAL SALES OFFICE dometic.com/dealer dometic.com/contact dometic.com/sales-offices A complete list of Dometic companies, which comprise the Dometic Group, can be found in the public filings of: DOMETIC GROUP AB Hemvärnsgatan 15 SE-17154 Solna Sweden 4445101897 YOUR LOCAL DEALER 242 601742 12/2019 dometic.