Installation Guide

9
Installing the toilet
EN
Then attach the toilet housing (with no more
than 7 screws, not enclosed) to the wall
(Fig. 10, 11).
Fig. 10
Screws Ø = 4.2 mm (0.165 ″)
Fig. 11
a
a = 38 /- 0.5 mm (1.5 /-0.02 ″)
b = 4.5 mm (0.18 ″)
b
Fig. 12
20
18,1
R 10
60
+0,5
0
74
-0,5
0
Fig. 13
.79
.714
R .394
2.36
2.91
4.3.1.2 Installing the control and opera-
tor panel of the CT 4110 toilet
Install the control and operator panel for the
CT 4110 toilet in an easily accessible position
on the wall. First cut the aperture in the wall
(Fig. 12, 13). Use true-to-scale template (1)
to make the wall aperture (see Item 4.9).
Connect the electric cables on the couplers to
install the control and operator panel (are sup-
plied separately).
In order to insert the control panel in the wall
aperture, press the holding springs (1) of the
control and operator panel back.
Fig. 14
Fig. 15
1
1
inch
mm
“More information https://www.caravansplus.com.au"