EN Cassette toilet for recreational vehicles Installation manual . . . . . . . . . . . . . . . 2 FR Toilettes à cassette pour véhicules de loisirs Notice de montage . . . . . . . . . . . . . . 20 ES Inodoros de cassette para vehículos de tiempo libre Instrucciones de montaje . . . . . . . . . 40 PT Sanitário de cassete para veículos de recreio Instruções de montagem . . . . . . . . . 60 CT4110, CTS4110 “More information https://www.caravansplus.com.
Dometic Group is a customer-driven, world-leading provider of leisure products for the RV, automotive, truck and marine markets. We supply the industry and aftermarket with a complete range of air conditioners, refrigerators, awnings, cookers, sanitation systems, lighting, mobile power equipment, comfort and safety solutions, windows, doors and other equipment that make life more comfortable away from home.
Table of contents 1.0 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 1.1 1.2 1.3 1.4 1.5 1.6 Guide to these installation instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Copyright protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Explanation of symbols used in this manual . . . . . . . . . . . . . . . . .
General 1.0 General 1.1 Guide to these installation instructions Before installing the toilet read and understand the contents of this manual. These instructions provide you with the necessary guidance for the proper installation of the toilet. Observe the safety instructions in particular. Observing the instructions and handling recommendations is important for dealing with the toilet safely and for protecting you from injury and the toilet from damage.
Safety instructions 1.4 Limitation of liability All information and guidance in these operating instructions were prepared after taking into consideration the applicable standards and regulations as well as the current state of the art. Dometic reserves the right to make changes at any time which are deemed to be in the interest of improving the product and safety.
Description of model 3.0 Description of model 3.1 Model identification 3.3 Example: CT S 4110 S = free-standing, without flush water tank, with console Cassette Toilet The CTx 4110 cassette toilet consists of a toilet which is installed fixed in the vehicle and a removable, mobile cassette as a blackwater tank. The cassette can be accessed from the outside through a door. The toilet receives the flush water from a fresh water tank installed in the vehicle. 3.
Installing the toilet 3.4 Explanation of components 5 4.0 Installing the toilet 4.1 Installing the service door The description for the installation of the service door can be found in the document supplied Dometic Seitz SK4, SK5 (optional/ depending on model). 1 4 2 6 3 Fig. 2 1 2 3 4 5 6 = = = = = = Removable cover and seat Toilet bowl Emptying blade for the toilet bowl Console Level indicator / control panel (flush) Service door 4.2 Create wall apertures 4.2.
Installing the toilet 4.3 Installing the toilet NOTICE! All components of the system must be installed in frost-protected areas. In minus temperatures there is a risk of damage due to frost. Allow sufficient space so as not to limit the operation of the emptying valve. Install the toilet against an upright wall only. When installing the toilet in a wet room, we recommend connecting the toilet with the shower tub.
Installing the toilet inch R. 39 4 .714 2.91 Then attach the toilet housing (with no more than 7 screws, not enclosed) to the wall (Fig. 10, 11). .79 2.36 Fig. 13 Fig. 10 In order to insert the control panel in the wall aperture, press the holding springs (1) of the control and operator panel back. 1 Screws Ø = 4.2 mm (0.165 ″) b a a = 38 /- 0.5 mm (1.5 /-0.02 ″) b = 4.5 mm (0.18 ″) 1 Fig. 11 Fig. 14 4.3.1.
Installing the toilet 4.3.2 Placing the CTS 4110 toilet The CTS 4110 model has no integrated water tank. 4.3.2.1 Fitting the wall holder Fit the wall holder (Fig. 19) in the designated position (see table, Fig. 20, 21) The control and operator panel is integrated in the housing with this model. This toilet can be installed directly against the room wall (see Fig. below). To fit the toilet and the console, a previously installed wall holder is used (see Section 4.3.2.1). Fig. 19 Fig. 16 Fig.
Installing the toilet 4.3.2.2 Fitting the CTS 4110 toilet Place the entire toilet module in the desired position in front of the wall holder. Lift the toilet. Then place the toilet so that the part on the side of the wall of the housing hooks into the the wall holder (Fig. 23). 6x Fig. 23 Fig. 24 If the toilet is installed in the desired position, bolt down the floor plate with the four screws.
Installing the toilet 4.4 Water connection The water supply is connected via an eletric solenoid valve (1), which is fitted in the toilet housing. Fit the fresh water supply pipe to the water inlet (2) with a 1/2 ″ NPT fitting. Place the ventilation hose on the integrated ventilation aperture of the service door as illustrated. 1 2 1 2 Fig. 29 Ventilation at SK5 Fig. 27 Then check the leak tightness. 4.5.
Installing the toilet 4.6 Electric connection Note the following instructions before installation of the cassette toilet: 4.6.1 System diagrams 4.6.1.1 General system diagram ! Connect the toilet to a suitable power supply via the main connection block of the vehicle (Fig. 31). ! The toilet must not be directly connected in parallel to other electrical circuits, otherwise malfunctions or damage to the toilet controller can occur (Fig. 32).
Installing the toilet 4.6.1.2 System diagrams (CTS 4110 models with external water pump) 12V DC Supply voltage: 12 V DC 12V connection cable profile : min. 1.5 mm² Toilet control fuse : 7.5 A (integrated automobile fuse) Current consumption of the pump : max. 5A NOTICE! Pump The external water pump must not exceed a nominal power of 60 W (12V/5A). Control and operator panel i The external water pump is not included in the scope of delivery. Fig. 33 4.7 Circuit diagram (external water tank) Fig.
Installing the toilet 4.8 Dimensioned sketches 4.8.1 CT 4110 Dimensions in mm 15 EN “More information https://www.caravansplus.com.
Installing the toilet Dimensions in inch 16 EN “More information https://www.caravansplus.com.
Installing the toilet 4.8.2 CTS 4110 Dimensions in mm 17 EN “More information https://www.caravansplus.com.
Installing the toilet Dimensions in inch 18 EN “More information https://www.caravansplus.com.
Installing the toilet 4.9 Template for control and operator panel installation Original size 1 19 EN “More information https://www.caravansplus.com.
