Product Manual

EN
CSO103 Using the device
15
I
Igniting the stove
➤ Proceed as shown (fig. 6, page 5 and fig. 7, page 6).
Igniting the oven
➤ Proceed as shown (fig. 8, page 7).
6.5 Turning off the device
➤ Proceed as shown (fig. 9, page 8).
6.6 Packing up the device
!
Proceed as follows:
➤ Turn off the device (see chapter “Turning off the device” on page 15).
➤ Disconnect the device from the gas supply.
➤ Clean the device (see chapter “Cleaning and maintenance” on page 16).
➤ Close the lid.
6.7 Replacing the gas cylinder
!
➤ Completely close the valve on the gas cylinder.
➤ Unscrew the regulator from the cylinder.
NOTE
• While it is operating, you will be able to hear a slight noise caused by
the gas flowing out. This is completely normal.
• Smoke can occur when using it for the first time. This is caused by
deposits of machine oil burning and stops after approx. 10 minutes.
CAUTION! Beware of burns
The device is very hot when you use it. Leave the device to cool down
before you clean, pack up or transport it.
WARNING! Beware of injury
Change the gas cylinder in a well-ventilated location.
Ensure that there are no open flames in the vicinity.
Only replace the gas cylinder when the device is switched off.
CSO103_IOM_APAC(en).book Seite 15 Donnerstag, 5. März 2020 4:28 16