Product Manual

EN
Using the device CSO103
14
6.2 Placing the device
When selecting the location for setting up the device, observe the following instruc-
tions:
• Position the device outdoors or in an enclosed space that meets the require-
ments shown in fig. 2, page 3.
• The place must be well-ventilated. Do not place it in a dip to prevent any gases
from accumulating there.
• Keep the device protected from the wind and direct drafts.
• The ground must be firm, level and stable.
• Never place the device near flammable materials, even when cooling down.
Keep a distance of at least 800 mm.
• Never place the device near flammable liquids. Keep a distance of at least 8 m.
• The device must stand on a base that can withstand heat of up to at least 80 °C.
The housing and grill cabinet become very hot when in use.
• Observe the safety instructions, see chapter “Safety precautions when handling
liquid gas” on page 10.
6.3 Connecting the device to the gas cylinder
➤ Connect the hose assembly to the device. It must be tightened using a suitable
spanner (such as an adjustable wrench) to obtain a gas tight seal.
➤ Proceed as shown (fig. 3, page 4 and fig. 4, page 4).
➤ After connecting the device to the gas supply, check the gas pipe for leakage
using a foaming agent, e. g. with soap. Never use a naked flame to test for gas
leaks.
6.4 Igniting the burners
!
WARNING! Beware of injury!
• Do not leave the device unattended while in use.
• Ignite the burners as soon as you have turned on the gas supply.
Otherwise gas can accumulate in the burner area and could cause an
explosion.
• The complete ignition process must be visible from above and must
not be hidden by pots placed on top of the stove.
CSO103_IOM_APAC(en).book Seite 14 Donnerstag, 5. März 2020 4:28 16