Installation Manual

Using the refrigerator CRX

8.2 Switching on the refrigerator

➤ Switch the refrigerator on by pressing the button.

8.3 Setting the temperature

➤ Press the button repeatedly until the desired temperature level is set. The

lower/largest LED is the coldest setting. The upper/smallest LED is the warmest

setting. To switch from the coldest level to the warmest level press the button

again.

8.4 Setting the fast cooling function

(CRX50, CRX65, CRX80 only)

The option of operating the refrigerator using a fast-cooling function allows temper-

atures suitable for freezing foods to be reached.

➤ Press the button longer than 3 seconds.

✓ The LED above the button lights up.

➤ Press the button again longer than 3 seconds to operate the refrigerator in

normal mode.

NOTE

After switching on, the refrigerator needs some time before the com-

pressor starts up.

NOTE

The cooling performance can be affected by:

• The ambient temperature

• The amount of food to be conserved

• The frequency with which the door is opened.

If the ambient temperature is at 16 °C (61 °F) to 20 °C (68 °F), set the

refrigerator to at least level 2.

NOTICE! DANGER OF DAMAGE

• Only use the fast-cooling function when the removable freezer com-

partment is not being used. Otherwise there is a risk that the freezer

compartment becomes too cold and condensate cannot be pre-

vented from forming on the outside of the refrigerator. The energy

consumption will also increase dramatically.

• Note that bottles and other containers can burst when frozen.

• Note that it is difficult to open the refrigerator directly after closing it.

DometicCRX50-65-80-110-140_IOM_4445103148_APAC(en)_20xx-xx-xx.book Seite 30 Montag, 3. August 2020 11:00 11