Installation Manual

Installing and connecting the refrigerator CRX

7.2 Notes on installing the refrigerator

Observe the following when installing the refrigerator:

• Install the refrigerator so that the warm air produced can easily flow away

(either upwards or to the sides, fig. 8).

Key for fig. 8

NOTICE! DANGER OF DAMAGE

• The cooling device can withstand a short term inclination of 30°, for

example on boats. When setting up the refrigerator, note that it must

be fastened to take account of this. If you have any questions regard-

ing installation, consult your specialist dealer.

• Install the refrigerator so that the warm air produced can easily flow

away (either upwards or to the sides, fig. 8).

• The appliance is designed for ambient temperatures between

+16 °C (61 °F) and +43 °C (109 °F).

• CRX110ACDC, CRX140ACDC: In winter mode the appliance can be

operated at ambient temperatures between +10 °C (50 °F) and

+16 °C (61 °F).

WARNING! Fire hazard!

• When positioning the device, ensure the supply cord is not trapped

or damaged.

• Do not locate multiple portable socket-outlets or portable power

supplies at the rear of the device.

No. Explanation

1 Cold intake air

2 Hot waste air

3 Condenser

4 Spacing above the refrigerator if there is not sufficient air to circulate

above or at the side.

DometicCRX50-65-80-110-140_IOM_4445103148_APAC(en)_20xx-xx-xx.book Seite 18 Montag, 3. August 2020 11:00 11