Instruction Manual

EN
CFX95DZW Operation
23
➤ Pull off the connection cable.
➤ Pry out the fuse insert (fig. 4 2, page 12) with a screwdriver.
➤ Replace the defective glass fuse with a new one that has the same rating
(4A 250V).
➤ Press the fuse insert back into the housing.
➤ Reconnect the power supply to the device.
7.15 Replacing the plug fuse (DC)
➤ Unscrew the contact pin housing (3) from the plug (1).
➤ Replace the defective fuse (2) with a new fuse that has the same rating
(3AG, 15 A).
➤ Re-assemble the plug in reverse order.
7.16 Replacing the light PCB
➤ Disconnect the power supply to the device.
➤ Pry out the transparent cover with a screwdriver (A).
7
1 2 3
8
A
B
C
CFX-95DZW--O-AU.book Seite 23 Mittwoch, 2. November 2016 12:27 12