Instruction Manual

EN
Operation CFX75DZW, CFX95DZW
26
7.16 Replacing the light PCB
Disconnect the power supply to the device.
Pry out the transparent cover with a screwdriver (A).
Unscrew the PCB mounting screws (B).
Pull out the plug from the PCB (C).
Replace the defective light PCB with a new one.
Fit the new PCB using reverse of removal instructions.
Press the transparent cover back into the housing.
Reconnect the power supply to the device.
8
A
B
C
CFX75_95DZW--O-AU.book Seite 26 Dienstag, 5. September 2017 2:08 14