Instruction Manual

EN
CFX75DZW, CFX95DZW Operation
15
Selecting the temperature units
Temperature display units can be switched between Celsius and Fahrenheit as
follows:
➤ Switch on the cooler.
➤ Press the “SET” button (fig. 3 4, page 10) three times.
➤ Use the “UP +” (fig. 3 10, page 10) or “DOWN –” (fig. 3 9, page 10) buttons
to select Celsius or Fahrenheit.
✓ The selected temperature units then appear in both displays for a few seconds.
The displays flash several times before returning to the current temperature.
7.2 Energy saving tips
• Choose a well ventilated installation location which is protected against direct
sunlight.
• Allow warm food to cool down first before placing it in the cooling device to
keep cool.
• Do not open the cooling device more often than necessary.
• Do not leave the cooling device open for longer than necessary.
• Defrost the cooler once a layer of ice forms.
• Avoid unnecessarily low temperatures.
CFX75_95DZW--O-AU.book Seite 15 Dienstag, 5. September 2017 2:08 14